This lets us free up the space allocated for the partition and gives
us dynamically allocated space for boot data like we have with the
rest of the operating system.
We do not do this for s390x because zipl does not support it.
Reference: https://fedoraproject.org/wiki/Changes/BtrfsBootForCloud
The Fedora LXDE spin does not have a fedora-release variant,
so the image build fails when trying to request one.
This is an error in fedora-release and will (hopefully) be eventually
fixed. For now, disable the block requesting it so we can restore it
later.
Wine in Fedora 43 is built with WoW64 which supports running 32-bit
Windows applications with 64-bit wine build.
While this might cause regressions in some corner cases it reduces the
image size considerably. The xz compressed erofs image shrank from
~1090MB to ~933MB.
Those are no longer needed. The system mesa contains fully functioning
asahi OpenGL/Vulkan drivers so there is no need to provide older
llvm-libs and clang-libs for mesa overlays.
This ensures that there's empty space for arm-image-installer to
inject firmware blobs into images as part of preparing to install
for various single board computers.
WSL does not support SELinux, so at best it's pointless to install. This
also actively breaks WSL 1 users, although I don't think we should
suggest that we support that, and if the policy on the builder doesn't
match the target things break during the build.
It also reduced the build time from ~80 seconds to ~70 seconds for me,
so that's nice.
See: 39b379f7d ("wsl: drop the SELinux packages from the WSL base image")
Signed-off-by: Jeremy Cline <jeremycline@linux.microsoft.com>
WSL does not support SELinux, so at best it's pointless to install. This
also actively breaks WSL 1 users, although I don't think we should
suggest that we support that, and if the policy on the builder doesn't
match the target things break during the build.
It also reduced the build time from ~80 seconds to ~70 seconds for me,
so that's nice.
Signed-off-by: Jeremy Cline <jeremycline@linux.microsoft.com>
This reverts commit 24c4fc39c2.
With a PR we can run the tests on openQA staging, identify any
problems with the change, and extend the tests to cover the
additional screens that show up with KDE.
This reverts commit e4d801674c.
openQA has not yet been prepared for this change and it is
causing all updates to fail gating. We need to prepare the tests
before merging this.
While the Web UI is still missing two features outlined in the Change Proposal [1], enabling it
early will help identify additional issues and improve integration. The missing features are:
- Date/Time Configuration Screen (currently implemented by GIS in Workstation)
- Configurable Browser Support (currently hardcoded to Firefox)
[1] https://fedoraproject.org/wiki/Changes/AnacondaWebUIforFedoraSpins#Detailed_Description
The serial device name on Arm is ttyAMA, not ttyS. This splits the
configuration for ELN images based on the architecture and adjusts the
kernel command line.
Note that prior to this change, aarch64 would still output kernel logs
to the ttyAMA0 console (on Azure, at least) due to the ACPI SPCR table.
On aarch64 the console in this table, if it's present, is _always_
configured as the kernel's default console. However, systemd logs would
not be sent to the serial console because it seems it was honoring the
kernel command line configuration which had ttyS0 as the default.
Note: this is the exact same change as 4979662a547e ("Cloud: Adjust
aarch64 images to use the correct serial console"), if you're reverting
this, you probably want to also revert that one.
Also see: https://pagure.io/cloud-sig/issue/394
Also see: https://bugzilla.redhat.com/show_bug.cgi?id=1661288
Signed-off-by: Jeremy Cline <jeremycline@linux.microsoft.com>
The serial device name on Arm is ttyAMA, not ttyS. This splits the
configuration for Cloud images based on the architecture and adjusts the
kernel command line.
Note that prior to this change, aarch64 would still output kernel logs
to the ttyAMA0 console (on Azure, at least) due to the ACPI SPCR table.
On aarch64 the console in this table, if it's present, is _always_
configured as the kernel's default console. However, systemd logs would
not be sent to the serial console because it seems it was honoring the
kernel command line configuration which had ttyS0 as the default.
Also see: https://pagure.io/cloud-sig/issue/394
Also see: https://bugzilla.redhat.com/show_bug.cgi?id=1661288
Signed-off-by: Jeremy Cline <jeremycline@linux.microsoft.com>
Although we include curl, some folks expect wget. Also, one of the more
common uses of WSL is in combination with VS Code, and its setup script
on remote hosts uses wget.
Signed-off-by: Jeremy Cline <jeremycline@linux.microsoft.com>
This became necessary with 10.0.13 / after merging
https://github.com/OSInside/kiwi/pull/2535 but doesn't seem to
noticeable effects besides miisin "GRUB_ENABLE_BLSCFG=true" in
/etc/default/grub.
It can be useful to have access to `setfiles` inside a `toolbx`
container. Especially when using them as bootstrap roots to setup
other trees.
Signed-off-by: Simon de Vlieger <supakeen@redhat.com>
The Raspberry Pi 3 does not recognize a FAT filesystem marked with
the 0xef type, so until we drop support for this device, hack the
partition manually to use a legacy FAT filesystem partition type.
It is hard to ensure that hardware support packages are pulled in
universally when it's splintered across different variant profiles.
To fix this and ensure Server benefits from this, unify everything
into a common profile and make everything require it.
U-Boot does not support XFS and this causes significant issues
when trying to boot Fedora Server on single board computers.
Resolve this by using ext4 here, as all U-Boot variants generally
support this.
Turns out that different boards needs different values, so
hardcoding a specific one here is not a good idea. Luckily,
Linux can usually figure things out on its own and automatically
provide a working serial console.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This renames the minimal profile to "tiny", it's useful to have a
profile that builds quickly and provides a small artifact. However, the
minimal name mirrors the Fedora Minimal spin name and might confuse
people building images about what they're actually building.
The Tiny descriptions do not replicate the Fedora Minimal spin.
Signed-off-by: Simon de Vlieger <supakeen@redhat.com>
This is a tiny package (250kB) that seems to be a relatively common
dependency (it just provides error codes and some common helpers, used
by stuff other than gpg itself).
Most of the changes are self-explanatory and just follow what's
already happening for existing architectures.
Two things are worth pointing out:
* we need to use shim-unsigned instead of shim-signed because
riscv64 is not fully integrated into Fedora yet and so we
can't do Secure Boot signing for the time being;
* we use ext4 as bootfilesystem since in most cases the
underlying firmware is going to be U-Boot, which needs to be
able to load the board's DTB from /boot and doesn't support
XFS.
Signed-off-by: David Abdurachmanov <davidlt@rivosinc.com>
This introduces the beginnings of an image definition for Windows
Subsystem for Linux (WSL).
The package list is based on the core and standard grouplists. Some
packages, like the kernel, dracut, and so on, are omitted as they are
unnecessary. Others, like audit, don't work in the environment. Finally,
many packages are omitted since I thought "people probably won't want
that", so the package list is completely up for debate. This is just a
reasonable starting point that works.
Build/test instructions:
To build the tarball:
$ ./kiwi-build --image-profile=WSL-Base --image-type=tbz --output-dir=./build/
Get it to a Windows host with WSL installed. To boot it with cgroupsv2,
add the following to `.wslconfig` in the Windows host home folder:
[wsl2]
kernelCommandLine=systemd.unified_cgroup_hierarchhy=1 cgroup_no_v1=all
This assumes the latest WSL release is installed, at least version 2.4.4:
$ wsl --install --from-file .\path\to\the\fedora.tar.xz
Alternatively, if you're using something prior to version 2.4.4:
$ wsl --import --version=2 Fedora C:\path\to\storage\Fedora\ .\path\to\the\fedora.tar.xz
Finally, run it with:
$ wsl -d Fedora
If you are using 2.4.4+, you will be prompted for a username and then
dropped into an interactive shell with that user and passwordless sudo
access.
If you're using an older version, you need to do:
$ wsl -d Fedora -u root
# /usr/libexec/wsl/oobe.sh
Signed-off-by: Jeremy Cline <jeremycline@linux.microsoft.com>
Neal Gompa